3
USER MANUAL
R-SERIES SUN SHELF TABLES
• To prevent the sun shelf tables from floating they must be filled with water to a height a few
inches higher than the depth of the water in which the table is to be placed. The table can
be filled with water either using a hose or water from the pool.
• Our recommendation is to fill the table using a hose, the table will be heavy once filled with
water. It is suggested that the table be filled with water near the Sun Shelf or in a spot close
to where the Sun Shelf will be placed for use. Turn the table upside down and remove the
two plugs, see Figure 3. Fill the table with water to the desired amoung, reinstall the plugs,
and turn the table right side up and place it in the appropriate spot on the Sun Shelf,
• To fill the table using the pool water from the pool, turn the table upside down and remove
the plugs, see Figure 3. Move the table into water deep enough that the table can mostly
be submerged. Position the table such that one of the fill/drain holes is above the waterline
and the other is beneath the water surface. Fill the table with water to the desired amount,
reinstall the plugs, and then turn the table right side up. The tables will be very heavy once
filled with water.
• To remove water from table, remove plugs and allow water to drain.
FIGURE 3
WARRANTY INFORMATION
For product warranty information and details, please visit our website at
srsmith.com/warranty
