8
Battery Pack
- The battery pack is located on top of the Control Box and is removable.
To remove - pull the battery pack away from the mounting plate so that the latch on the battery
pack clears the side tabs on the mounting plate - then lift the battery pack up and away from the
Control Box.
To replace - align the battery pack with the mounting plate so that the latch will drop over the
center tab and that the bottom of the battery pack will fit in the recessed area on top of the Control
Box. Lower the battery pack in place so that the latch is fully captured by the mounting plate and
the battery pack drops fully seated onto the Control Box.
*Image courtesy of Deltran Battery Tender
The battery pack should be charged daily. Do not allow battery to fully discharge, as it will shorten battery
life. Whenever battery is removed from Control Box or lift that is not in use it is important to connect the
battery to the charger. This ensures battery is fully charged and ready for use.
Prior to connecting the charger to the battery, make sure that the LEAD ACID battery type is
selected and that the selected voltage is 24V. After the correct battery type and voltage is
selected, connect the charger to the battery.
