4
WARNINGS AND SAFETY RULES
READ AND SAVE THESE INSTRUCTIONS:
•
Your cooler will run on 120 Volt AC, 60 Hz current only.
•
Check the household voltage to ensure it matches the appliance’s rate specification.
•
Can be used indoors and outdoors.
•
DO NOT operate any product with a damaged cord or plug.
•
Always unplug the product before refilling the water tank through the ‘water fill door’.
•
Always unplug the product when moving it.
•
Disconnect the power supply before servicing or cleaning operation.
•
Remove the power cord from the electrical receptacle by grasping and pulling on the plug only,
never from the cord.
•
DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage
the product and could cause an electrical shock or fire.
•
DO NOT use the product in areas where gasoline, paint or other flammable goods and objects
are stored.
•
When using the ‘’Cool’’ setting, please check the water tank to ensure it is full. Operation of
this unit on the ‘’Cool’’ setting on an empty tank could result in damage to the water pump.
•
DO NOT attempt repair or adjustment to any electrical or mechanical functions of the cooler, as
this may void the warranty.
•
Please check that the voltage in the area to be cooled is correct for the air cooler specification.
Incorrect voltage will burn out the blower/fan, oscillating and/or pump motor windings and will
void the warranty.
•
DO NOT cover the air inlet or outlet on the appliance as this may cause motor damage.
•
DO NOT operate with element removed.
•
DO NOT operate unit near open containers of flammable liquids.
•
DO NOT use this fan with any solid-state speed control device.
•
Always unplug the appliance from the power source before servicing or removing the unit.
•
Do not leave the appliance operating unattended for any extended period of time.
•
This appliance is not intended for use by persons(including children) with physical disabilities
unless they are supervised or have been given proper operating intructions.
•
Do not let children play with any appliance packaging or plastic bags.
•
Place power cord away from areas where it may cause persons to trip.
•
When not in use always store in a dry area.
•
Do not use this unit with any solid-state speed control device
•
If the unit is damaged or it malfunctions, do not continue to operate it. Refer to the
troubleshooting section and /or please call customer service or S.O.Ltd for assistance.
