The remote
control battery
cover
Trigger
TH. D/R
ST. TRIM
Power LED
Steering
regulating wheel
Power switch
1. Turn on the power switch on the remote and make sure the power indicator
flashes red, then turn on the model car's power switch.
2. Gently trigger the remote control to observe if the car can move
forward and backward.
3. Turn the remote control steering wheel to the left or right and make sure
that the front wheel's steering follows the command.
4. The model car on the ground, and standing behind the model car, gently hook
the remote control throttle trigger , if the model car does not go straight,
rotate the remote control front wheel trim , the model car to the right side,
the front wheel Turn the trim to the left, the model car leans to the left, and the
front wheel trims to the right to rotate until the model car can go straight.
5. Throttle speed adjustment can adjust the model car speed, rotate to the
right, hook the trigger model car speed becomes faster, turn left, hook the
trigger model car speed becomes slower.
6. If everything opperates OK, the SPEED RC is ready to run.
