background image

GB

 

 

3

INTRODUCTION 

 

This manual provides Use and Maintenance in-
structions, technical specifications, and safety pre-
cautions for reversible two-wheel tractor: 

 

model REV. 1000 (2+2) 

 

model REV. 1000 E (2+2) 

 

model REV. 1000 Special (3+2) 

  in the versions with Diesel and gasoline engine. 

 

For the sake of clarity and ease of identification, 
the different two-wheel tractor models are identi-
fied in this manual by means of the following 
codes: 

 

1000

 identifies reversible two-wheel tractors 

model REV. 1000 (2+2) and REV. 1000 Diesel 
(2+2). 

 

1000 E

 identifies reversible two-wheel tractors 

model REV. 1000 E (2+2). 

 

1000 Special

 identifies reversible two-wheel 

tractors model REV. 1000 Special (3+2) and 
REV. 1000 Diesel Special (3+2) 

 

The first section of this manual provides technical 

specifications and gives instructions relevant to 
the machine. The second section of the manual 
gives further details on individual attachments, 
and provides all specific operating instructions. 

 

Read this USE and MAINTENANCE Manual care-
fully before using your new two-wheel tractor. This 
manual provides the most up-to-date information 
on your two-wheel tractor available at the time of 
going to press. Manufacturer reserves the right to 
modify this document at any time without prior no-
tice. 

 

AFTER-SALES SERVICE. Use only original spare 
parts. The use of non-original parts voids the war-
ranty. When ordering spare parts, specify: 

 

two-wheel tractor serial number; 

 

part code of spare part required; 

 

quantity or number of parts required. 

SAFETY REGULATIONS 

GENERAL NOTICES 

Any engine driven machine can become dangerous if 
used incorrectly. Pay particular attention to the in-
structions in this manual marked: 

 

WARNING 

This symbol means that failure to observe the regula-
tion could cause injury or even death to the operator. 

 

PRUDENCE 

 

 

 

Prudence is the Golden Rule to prevent accidents. 

 

TRAINING 

The two-wheel tractor must only be used by respon-
sible people trained in the use of the machine and 
duly authorized to use it. 

 

MACHINE AND 
ENGINE MANUALS 

 

  

 

Read those MANUALS carefully before starting, us-
ing, servicing, refuelling or carrying out any work on 
the two-wheel tractor. 

 

DECALS

 

Read all the decals attached to the two-wheel tractor 
and follow their prescriptions before starting, driving, 
refuelling or servicing the machine. Replace immedi-
ately any damaged or illegible decals. 

 

SUITABLE CLOTHING

 

 

Do not wear wide and flapping clothes that could 

be caught in moving parts. 

 

Always wear robust gloves when servicing the two-

wheel tractor or coupling attachments. 

 

Do not operate your two-wheel tractor barefoot, 

wearing sandals or shorts. Wear heavy shoes and 

trousers. 

 

PHYSICAL CONDITION

 

Do not drive the two-wheel tractor if your physical 
condition is not suitable. 

 

NOISE  

 

In order to reduce the problems deriving from the 
noise of the machine: 

 

Do not work with the engine at maximum RPM 

range. 

 

Keep the blade head and the blade holder ad-

justed. 

 

When using the machine for a long time, use ear 

protections. 

 ENGINE 

RPM 

Do not interfere with the engine speed governor: run-
ning the engine at a too high speed increases the risk 
of accident. 

  FIRST AID  

 

It is good operating practice to have a first aid box on 
the two-wheel tractor. 

Содержание REV. 1000 E (2+2)

































Отзывы: