SE-RDA User Instructions 100507-03 B
Copyright © 2021 The S.E.A. Group
16
2.
With the supplied USB cable, connect a USB port on the PC to the USB port on
the SE-RDA unit.
a.
If “Ports” now appears in the list, click to open it. In the example below, a
USB to UART bridge port exists, and is configured as port “COM3”.
The PC recognises the SE-RDA unit and is ready to communicate with it.
Go to the next step: “To install the SE-RDA software (Windows PC only)”
in page 19.
b.
If “Ports” item does not appear, the USB to UART bridge controller should
appear elsewhere (In the example below it appears under “Other
Devices”) as shown on the picture below. Please note the exclamation
mark at the beginning of the line.
