8
4 Installation
4.1.2 Mounted on the wall
Use wall mount accessory article number 27305.
IMPORTANT NOTE
: Use suitable fastening (screws
and plugs) based on the construction of the wall
(not included in kit). Filter racks in operation weigh
approximately 30 kg (66 Ibs).
1. Remove the filter rack securing bolts (Fig. 4).
2. Make sure the wall mount is level. If drilling is
needed, make sure to mark where as displayed
in Fig. 5.
3. Fasten the wall mount on the wall using four
screws in the holes as displayed in Fig. 5.
3. Position the filter rack pins in the holes (Fig. 6).
4. Fasten the previously unscrewed rack securing
bolts to fix the filter rack on the wall mount (Fig. 7).
Figure 4
Figure 5
Figure 6
Figure 7
