3
2.2 Receiver
1)
ON: Working status indicator of this device. When the device works fine, this green
LED will keep blinking. And it will get off when the device stops work.
2)
LINK: Twisted Pair Link status indicator, green LED. It will keep on when
connection is successful.
3)
OUT: When connected with devices support HDCP and work normally this LED will
keep on. If devices not support HDCP, this green LED will blink.
4)
POWER LED: When connect with power, red LED will keep on.
5)
HDBT IN: Connect to the HDBT OUT port of Transmitter with a CAT5e cable.
6)
HDMI IN: Connect to HDMI display device.
7)
IR IN: Connect with IR Receiver to collect infrared signal, work with far-end IR OUT
port.
8)
IR OUT: Connect with IR Emitter to send infrared signal, work with far-end IR IN
port.
9)
RS232: RS232 connector.
10) 24V DC: Connect with power supply (Not necessary if Transmitter connects with
power).
Note:
Pictures shown on this manual are for reference only, different model and
specifications are subject to real product.