ETHERLINK II - Repeater
Manual
Page 68 of 106
4.6.4.16
<BACKUP> command
The <BACKUP> command is used to create a backup of the running configuration of the device
in the EEPROM.
As a result, the running configuration is written to the backup configuration.
For example:
RR_01_FMM>BACKUP
Current running configuration is written to
backup configuration in EEPROM
RR_01_FMM>
4.6.4.17
<RESTORE> command
The <RESTORE> command restores the startup configuration from the backup configuration,
which is written in the EEPROM.
As a result, values from the backup configuration are written into the startup configuration.
For example:
RR_01_FMM>RESTORE
Restored startup configuration from backup configuration.
Reset modem for all changes to take effect
RR_01_FMM >
The modem should be restarted in order the restored values become valid.
4.6.4.18
<DIFF N/R/S/B N/R/S/B > command
The <DIFF N/R/S/B N/R/S/B> command displays differences in configurations. The difference
between four configurations is displayed: Running, New, Startup, or Backup (see
Section 2.3).
For example:
RR_01_FMM>DIFF R B
------------------------------------------------------------------------
Running configuration Backup configuration
------------------------------------------------------------------------
VLAN.VLANMASK.3
00 01 | 00 07
------------------------------------------------------------------------
RR_01_FMM>
The command displays the name of the difference parameter and data from two configurations.
In the above example one can see that the VLANMASK parameter of interface 3
(WAN2) of the VLAN group in the running configuration differs from the backup
configuration.
If there are no differences, the result is presented as follows:
CO_FMM>DIFF N R
------------------------------------------------------------------------
New configuration Running configuration
------------------------------------------------------------------------
--- No differences --- --- No differences ---
------------------------------------------------------------------------
CO_FMM>
Содержание SA-REP-ETHERLINK_II-1DA-IP67
