INSTRUCTION
982754.002
Make sure that the mains voltage is switched off when making any connections.
2
Use 0.5 - 1.5 mm
2
stranded or 0.5 - 2.5 mm solid conductor electrical wires. Strip the wire
Insert the wires to the corresponding holes and tighten the connector screw. Make sure
to connect the input and outputs correctly.
10 - 12 mm from the end. When using flexible cables, ferrules must be used.
The mains input is marked with the letters N and L, the output is marked with the names
and
.
DALI(+A-)
DALI(+B-)
Installation
!
Note:
A connecting higher voltages than DALI voltage leads to the destruction of the device.
Operation with 24 V / 110 V / 230 V is generally not permitted!
If you install the control unit in a warm environment (i.e. inside a luminaire or in a ceiling outlet
box above a luminaire), make sure that the ambient temperature does not exceed the
specified maximum value.
Wiring-diagram DALI Pro 2 IoT Controller (for example: Line A)
DALI ECG
2021-01-29
www.rzb.de
5
