Ryonet Riley Hopkins Junior, Руководство по сборке

Страница: 8 / 14

7
Step 5
Set up screen. First lock the screen in place with the screen clamping
knobs (1). It is ideal to fully seat the screen into the back of the screen
clamp as shown.
Next, loosen the off-contact nuts (2) with a 9/16” wrench. Set the
desired off-contact position and retighten the nuts.
Lastly, set the tilt angle of the screen by loosening the tilt locking nuts
(3). Make sure to fully lock down the tilt hardware to avoid movement
during printing.
1
1
2
3