Ryobi SS180, Руководство оператора, Страница: 12 / 16

12
OPERATION
USING CIRCLE CUTTER
See Figure 10.
Follow these directions when using the circle cutter.
■
Assemble circle cutter if necessary. Refer to “AS-
SEMBLING CIRCLE CUTTER” earlier in this manual.
■
Attach circle cutter to Speed Saw if necessary. Refer
to “ATTACHING CIRCLE CUTTER” earlier in this
manual.
■
Adjust depth of cut if necessary. Refer to “ADJUST-
ING DEPTH OF CUT” earlier in this manual.
■
Loosen pivot point knob.
■
Move pivot point knob to desired diameter dimen-
sion.
■
Tighten pivot point knob.
■
Start Speed Saw.
■
Cut a pilot hole in the center of the intended circle.
■
Line up pivot point knob with the lead hole.
■
Begin cut, applying moderate, steady pressure.
■
Hold the Speed Saw firmly with one hand and the
handle with the other.
CAUTION:
Too much force causes heat build up, which can
shorten the life of the bit.
■
Work in a clockwise direction, continuing back to the
starting position.
■
Stop Speed Saw.
Fig. 10