Ryobi SA1202, Руководство оператора

Страница: 7 / 20

Page 7
INSTRUCTIONS
When unpacking the tool:
■
Carefully remove the tool and accessories from the box.
■
Make sure that all items listed in the packing list are in-
cluded.
■
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
■
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
■
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
Cordless Drill
Charger
Battery Pack (2)
Operator’s Manual
Case
WARNING:
If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
You may use the two speed drill for the purposes listed below:
■
Drilling in wood
■
Drilling in ceramics, plastics, fiberglass, and laminates
■
Drilling in both hard and soft metals
■
Using driving accessories, such as driving screws with screwdriver bits
■
Mixing paints
UNPACKING
APPLICATIONS
SPECIFICATIONS
DRILL-DRIVER SA1202 SA14402 SA1802
Chuck 3/8 in. (10 mm) Keylessw 3/8 in. (10 mm) Keyless 1/2 in. (13 mm) Keyless
Motor DC Motor 12 Volt DC Motor 14.4 Volt DC Motor 18 Volt
Gear Train Two Speed Two Speed Two Speed
Switch Variable Speed Variable Speed Variable Speed
No Load Speed 0-300 RPM (Low) 0-400 RPM (Low) 0-350 RPM (Low)
0-1000 RPM (High) 0-1400 RPM (High) 0-1300 RPM (High)
Clutch 24 Positions 24 Positions 24 Positions
Charger Input 120 V, 60 Hz, AC only 120 V, 60 Hz, AC only 120 V, 60 Hz, AC only
Charge Rate 1 Hour 1 Hour 1 Hour
Torque Maximum 220 in.lbs. Maximum 270 in.lbs. Maximum 400 in.lbs.