Ryobi RY36C17A, Оригинальное руководство пользователя

Страница: 6 / 12

4
Do not place the charger and battery pack in an area of
extreme heat or cold. They work best at normal room
temperature.
NOTE:
When charging, the charger and battery pack
should be placed in a location where the temperature is
more than 10°C but less than 25°C.
CHARGING A COOL BATTERY PACK
See Fig. 2
1. Connect the power cord to the product.
2. Align the raised rib on the battery pack with the groove
in the product, and slide in the battery pack.
Make sure that the battery pack latch clicks into place.
3. Connect the product to a power supply.
See Fig.3
4. Disconnect the product from the power supply when the
battery pack becomes fully charged.
5. Press the battery pack latch to unlock the battery pack
from the product.
6. Slide the battery pack off the product.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the cells in the battery
pack becomes hot. A hot battery pack should be cooled
down for approximately 30 minutes before recharging.
MAINTENANCE
■ When not using or when cleaning the product,
disconnect it from the power supply and remove the
battery pack.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents. Use clean cloth or soft brush to remove dirt
and dust.
■ Do not, at any time, let brake fluids, gasoline, petroleum-
based products, and penetrating oils come in contact
with plastic parts. These products contain chemicals
that can damage, weaken, or destroy plastic.
WARNING
Hazardous voltages are present within the product; do
not disassemble.
■ The supply cord cannot be replaced. If the
cord is damaged, the product should be
scrapped.
CLEANING THE CHARGER
WARNING
Unplug the charger power cord from power supply
before cleaning at any time to prevent serious personal
injury.
■ Clean the charger surface (except labels) using a damp
cloth with a mild detergent.
■ Do not use any strong detergents on the plastic housing.
They can be damaged by certain aromatic oil such as
pine and lemon, and by solvents such as kerosene.
■ Moisture can cause a shock hazard. Wipe off any
moisture with a soft dry cloth.
STORAGE
Store your charger in a cool dry place between 10°C. and
38°C.
CIFICATIONS
KNOW YOUR PRODUCT
See Fig. 1
1. RY36C17A Charger
2. Battery port
3. Power cord
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to
operate the product better and safer.
Precautions that involve your safety.
To reduce the risk of injury, user must
read and understand user’s manual
before using this product.
Class II: Protection against electric
shock rely on double insulation or
reinforced insulation.
Time-lag type fuse
Indoor use only
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
CE conformity
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.