Ryobi RY170PWA, Руководство пользователя

Страница: 4 / 24

4
Original Instructions
■ Stay alert and exercise control. Watch what
you are doing and use common sense.
■ Do not use the product while tired, ill, or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the product may result in serious
personal injury.
■ Do not use the product if the switch does not
turn it on and off. Any product that cannot
be controlled with a switch is dangerous
and must be repaired.
■ Keep a minimum distance of 30 cm when
cleaning vehicles. The high pressure jet
may damage or burst vehicle tires and/or
tire valves.
■ Use a garden hose with a maximum length
of 15 m and minimum diameter of 18 mm
(3/4 in.).
■ Before each use, ensure that the accessory
is securely attached to the trigger gun.
OVERLOAD PROTECTION
The product has an overload protection device
that is activated when overheating or when a
current spike occurs, automatically shutting
down the power within the product. To resume
operation, disconnect the product from the
power supply, wait for about 15 minutes, and
reconnect the product to the power supply.
TRANSPORTATION AND STORAGE
CAUTION! Mind the weight of the product
when selecting the storage location and during
transportation to prevent accidents or injuries.
■ Stop the product, disconnect from the power
supply, and allow the product to cool down.
Disconnect the product from the water
supply before storing or transporting. Never
place the product in any position other than
upright.
■ Clean all foreign materials from the product.
Store it in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
the product away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store the product outdoors.
■ Remove water from all hoses and the pump,
and empty the detergent tank before storing
the product.
■ For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
■ Store the product indoors only. Storing the
product in an area with temperature below
0°C will damage the product.
MAINTENANCE
■ Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
■ Servicing requires extreme care and
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
■ Turn off the product, disconnect from the
power supply and water supply, and allow
the product to cool down:
● before servicing
● before clearing a blockage
● before checking, cleaning, or working on
the product
■ You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
■ Regularly inspect and maintain the high
pressure cleaner for safe operation. RYOBI
recommends inspecting the product every
6 months.
■ Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
KNOW YOUR PRODUCT
See page 7.
1. Carry handle
2. High pressure hose
3. Hose reel
4. Reel handle
5. Rolling support
6. Adapter clip
7. Internal high pressure hose
8. Detergent tank cap
9. Detergent tank
10. Lance hook
11. Power cord holder
12. Trigger gun holder
13. On/off switch
14. Handle screws