Ryobi RSCD750 Скачать руководство пользователя страница 5

GENERAL SAFETY WARNINGS

 

Read all safety warnings and all instructions.

 

Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious 

injury. Save all warnings and instructions for future 

reference.

 

Know your product. Read operator’s manual 

carefully.

 Learn its applications and limitations, as 

well as the specific potential hazards related to the 

product. Following the rule will reduce the risk of 

electric shock, fire, or serious injury.

 

Do not let familiarity gained from frequent use 

of tools allow you to become complacent and 

ignore tool safety principals.

 A careless action 

can cause severe injury within a fraction of a 

second.

 

Follow appliance manufacturer’s’ instructions 

regarding operation and power.

 Use of the 

appliance different from those intended could result 

in a hazardous situation.

 

Use the correct product for the application.

 

Do not allow children to operate the product or 

play with the product as a toy.

 Close attention is 

necessary when used near children.

 

To reduce the risk of personal injury and electric 

shock, the product should not be played with or 

placed where small children can reach it.

 

The product is intended for household use only.

 

Use the product only for its intended use as 

described in this manual.

 

Only use attachments and accessories specified 

by the manufacturer.

 

Do not put any objects in ventilation openings.

 

Do not use the product with any opening blocked. 

Keep openings free of dust, lint, hair and anything 

that may reduce air flow.

 

Stay alert, watch what you are doing and use 

common sense when operating the product.

 Do 

not use while you are tired or under the influence 

of drugs, alcohol or medication. A moment of 

inattention may result in serious personal injury.

 

Do not place product near any heat sources 

such as radiators, heat registers, stoves, or 

other products (including amplifiers) that 

produce heat.

 

Do not place the product near fire or heat; it may 

explode.

 

Risk of uncontrolled situations when used in 

ambient temperatures below 0°C or above 35°C.

 

Keep the product dry, clean and free from oil and 

grease. 

Always use a clean cloth when cleaning.

 

Keep handles and grasping surfaces dry, clean 

and free from oil and grease. 

Slippery handles 

and grasping surfaces do not allow for safe handling 

and control of the tool in unexpected situations.

 

Do not overreach. Keep proper footing and 

balance at all times.

 This enables better control of 

the product in unexpected situations.

 

When servicing the product, use only 

manufacturer’s replacement parts, accessories 

and attachments. 

Follow instructions in the 

Maintenance section of the manual. Use of 

unauthorised parts or failure to follow maintenance 

instructions may create a risk of shock or injury.

 

Save these instructions.

 Refer to them frequently 

and use them to instruct others who may use this 

tool. If you loan someone this tool, loan them these 

instructions also

 

TRANSFER PUMP SAFETY 

WARNINGS

 

Do not let the pump run dry.

 

Do not remove hose while pump is still 

operating.

 

Do not allow the product to run unattended.

 

Do not lift the pump by the hoses.

 

Periodically inspect the pump, hoses and water 

inlet. 

Ensure hoses and water inlet are free from 

mud, sand and debris. 

 

If the replacement of the supply cord is necessary, 

this has to be done by the manufacturer or his 

agent in order to avoid a safety hazard; The pump 

is to be supplied through a residual current device 

(RCD) having a rated residual operating current not 

exceeding 30mA

RESIDUAL RISKS

 WARNING

This product is intended for pumping water in 

a Home Domestic application. Do not use it for 

corrosive, abrasive, explosive or dangerous liquids. 

Fluids other than water will damage the water pump 

and/or create a fire hazard.Failure to follow all 

instructions listed below may result in electric shock, 

fire and/or serious injury.

This appliance is not intended for use by person 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person 

responsible for their safety.

Children should be supervised to ensure that they do 

not play with the appliance.

 WARNING

This product is not suitable for use with drinking 

(potable) water.

 

Ensure the water pump is disconnected from mains 

power when installing.

 

Do not install or operate the water pump in an 

explosive environment or near flammable material.

 

Do not operate the water pump without liquid.

 

Do not run the water pump dry.

Important!

It is essential that you read the instructions in this manual before assembling, 

operating and maintaining the product.

Subject to technical modification.

1

Содержание RSCD750













Отзывы: