Ryobi RPW36120HI, Оригинальное руководство пользователя, Страница: 10 / 32

8
TROUBLESHOOTING
Problem Possible causes Solution
Machine does
not start
Drained battery Charge the battery.
Deffective battery Replace with compatible battery pack.
Fuse has blown Bring the product to an authorized service
centre for service or repair.
Fluctuating
pressure
Pump is sucking air Check that hoses and connections are air
tight.
Valves are dirty, worn
out, or stuck
Clean and replace the part or refer to a local
distributor.
Pump seals worn out Clean and replace the part or refer to a local
distributor.
Motor buzzes Low voltage or low
temperature
Activate the trigger of the spay handle.
Machine stops Fuse has blown Bring the product to an authorized service
centre for service or repair.
Drained battery Charge the battery.
Thermal sensor activated Leave the high pressure cleaner for 15
minutes to cool down.
Nozzle partially blocked Clean the nozzle.
Fuse blows Fuse too small Bring the product to an authorized service
centre for replacement.
Machine
pulsating
Air in inlet hose/pump Allow the product to run with open trigger until
regular working pressure resumes.
Inadequate supply of
mains water
Check that the water supply corresponds to
the specifications required (see model tag).
Avoid using long, thin hoses.
Nozzle partially blocked Clean the nozzle.
Water filter blocked Clean the filter.
Hose kinked Straighten out hose.
Machine often
starts and stops
by itself
Pump/spray handle is
leaking
Contact your nearest authorized service
centre.
Machine starts,
but no water
comes out
Pump, hoses, or other
accessory is frozen
Wait for the pump, hoses, or other accessory
to thaw.
No water supply Connect the water inlet port to a water supply.
Water filter blocked Clean the filter.
Nozzle blocked Clean the nozzle.