Ryobi RPW170-G, Оригинальное руководство пользователя

Страница: 5 / 28

3
■ Stop the product, disconnect from the power supply,
and allow the product to cool down. Disconnect
the product from the water supply before storing or
transporting. Never place the product in any position
other than upright.
■ Remove water from all hoses and the pump, and empty
the detergent tank before storing the product.
■ Clean all foreign materials from the product. Store it
in a cool, frost-free, dry, and well-ventilated place that
is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
Do not store outdoors.
■ For transportation in a vehicle, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, contribute to poor performance,
and may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service, bring the product to an
authorised service centre. When servicing, use only
original replacement parts.
■ Stop the product, disconnect from the power supply,
and allow the product to cool down. Disconnect the
product from the water supply before:
● cleaning the product
● maintaining the product
● replacing spare parts
■ You may make adjustments or repairs described in
this manual. For other repairs, contact an authorised
service centre.
■ Regularly inspect and maintain the high pressure
cleaner for safe operation. Ryobi recommends
inspecting the product every 6 months.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ Injury caused by the high-pressure jet
– Avoid pointing the high-pressure jet to people,
animals, and to yourself.
■ Injury caused by kickback
– Always hold the handle or the trigger wand firmly
with your two hands.
■ Injury caused by inhalation of aerosols
– Wear appropriate respiratory mask.
■ Injury caused by exposure to noise
– Wear ear protection.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
SYMBOLS ON THE PRODUCT
Warning
To reduce the risk of injury, user must
read and understand operator’s manual
before using this product.
Wear eye and hearing protection.
Remove plug from the mains immediately
if cable is damaged or cut.
Electrical shock hazard
The product is not suitable for connection
to the drinking water mains without
backflow preventer.