Ryobi RPW130XRB, Оригинальное руководство пользователя

Страница: 5 / 28

3
WARNING
High-pressure jet can be dangerous if
subject to misuse. The jet must not be
directed to people, animals, electrical
devices, or the product itself.
■ Hold the trigger handle securely with both
hands. Expect the handle to move when
the trigger is pulled due to reaction forces.
Failure to do so could cause loss of control
and injury to yourself and others.
■ Make sure that the air in the hose and pump
is released before you turn on the product.
To remove the air in the hose and pump,
connect the water supply to the pump
using a garden hose, connect the trigger
handle to pump using the high-pressure
hose, disengage the trigger handle lock,
and press the trigger until there is a steady
flow.
■ Exercise caution to avoid slipping or falling.
■ Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
■ Use only accessories that are
recommended by the manufacturer. The
use of improper accessories may cause
injury.
■ Never leave the product running
unattended. Turn off the product. Do
not leave the product until it comes to a
complete stop.
■ Be familiar with the controls. Know how to
stop the product and bleed the pressure
quickly.
■ Stay alert and exercise control. Watch what
you are doing and use common sense.
■ Do not use the product while tired, ill, or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the product may result in serious
personal injury.
■ Do not use the product if the switch does not
turn it on and off. Any product that cannot
be controlled with a switch is dangerous
and must be repaired.
■ Keep a minimum distance of 30 cm when
cleaning vehicles. The high-pressure jet
may damage or burst vehicle tires and/or
tire valves.
■ Use a garden hose with a maximum length
of 15 m and minimum diameter of 18 mm
(3/4 in.).
■ Before each use, ensure that the accessory
is securely attached to the trigger gun.
OVERLOAD PROTECTION
The product has an overload protection device
that is activated when overheating or when a
current spike occurs, automatically shutting
down power within the product. To resume
operation, disconnect the product from the
power supply, wait for about 15 minutes and
reconnect the product to the power supply.
TRANSPORTATION AND STORAGE
CAUTION
Mind the weight of the product when
selecting the storage location and during
transportation to prevent accidents or
injuries.
■ Stop the product, disconnect from the
power supply, and allow the product to cool
down. Disconnect the product from the
water supply before storing or transporting.
Never place the product in any position
other than upright.
■ Remove water from all hoses and the
pump, and empty the detergent tank before
storing the product.
■ Clean all foreign materials from the product.
Store it in a cool, frost-free, dry, and well-
ventilated place that is inaccessible to
children. Keep the product away from
corrosive agents such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
■ For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
WARNING
Store the product indoor only. Storing in
an area with temperature below 0°C will
damage the product.