5
Guaranteed sound pressure and sound
power level.
Full choke position
Half choke position
Run position
Pull the starter rope.
Squeeze the throttle lock and throttle
trigger to run.
Waiting time - 10 seconds
Push primer bulb
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
Symbol
Meaning
DANGER:
Indicates an imminently hazardous
situation, which, if not avoided, will result
in death or serious injury.
WARNING
:
Indicates a potentially hazardous
situation, which, if not avoided, could
result in death or serious injury.
CAUTION:
Indicates a potentially hazardous
situation, which, if not avoided, may result
in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates
a situation that may result in property
damage.
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician.
For service, we suggest you bring the product to the
nearest service centre for repair. When servicing, use only
identical replacement parts.
WARNING
To avoid serious personal injury, do not attempt
to use the product until you read thoroughly and
understand completely the operator’s manual. If you
do not understand the warnings and instructions in the
operator’s manual, do not use the product. Call RYOBI
customer service for assistance.
WARNING
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shields and, when needed, a full face
shield. We recommend WIDE VISION SAFETY MASK
for use over eyeglasses or standard safety glasses with
side shields.
DESCRIPTION
See figure 1
1. Bar
2. Chain
3. Pruner attachment
4. Chain oiler tank cap
5. Coupler
6. Extension shaft
7. “J” handle
8. Engine switch
9. Starter grip
10. Primer bulb
11. Throttle trigger
12. Shoulder strap
13. Knob
14. Scabbard
15. Combination wrench
16. Clamp
17. Long bolt
18. Flat washer
19. Lock nut
20. Latch
21. Bolt
22. Strap hanger
23. Button
24. Guide recess
25. Positioning hole
26. Pruner attachment
27. Load
28. First cut ¼ in. diameter
29. Second cut
30. Final cut
31. Spiked bumper
32. Trigger lock
33. Spark plug
34. Choke lever
35. Spark arrestor
36. Fuel cap
37. Flats
38. Approximately 1.3 mm (0.050 in.) and 4 mm (0.16 in.)
39. Bar nut
40. Drivecase cover
41. Bar stud
PLACEHOLDER
