background image

DESCRIPTION

5

SPECIFICATION

SPECIFIC SAFETY RULES FOR LAWNMOWER

  1. Never allow children or people unfamiliar with these

      instructions to use the lawnmower. 
  2. This appliance is not intended for used by persons 

      (includiing children) with reduced physical,sensory or

      mental capabilities, or lack of experience and   

      knowledge, unless they have been given supervision or

      instruction concerning use of the appliance by a person

      responsible for their safety. 

      Children should be supervised to ensure that they do

      not play with the applinance. 
  3. Never mow while people, especially children or  pets, 

      are nearby. 
  4. Do not operate the lawnmower when barefoot or 

      wearing open sandals, always wear substantial footwear

      and long trousers.
  5. Thoroughly inspect the area where the lawnmower is to 

      be used and remove all stones, sticks, wires, bones and

      other foreign objects.
  6. Before using, always visually inspect to see that the 

      blades, blade bolts and cutter assembly are not worn or

      damaged. Replace worn or damaged blades and bolts

      in sets to preserve balance. 
  7. Mow only in daylight or in good artificial light.
  8. Avoid operating the lawnmower in wet grass, where 

      feasible.
  9. Walk, never run.
10. Never operate the appliance with defective guards or 

      shields, or without safety devices, for example 

      deflectors and/or grass catchers in place.
11. Mowing on banks can be dangerous:

      

• 

Do not mow excessively steep slopes.

      • 

Always be sure of your footing on slopes or wet grass. 

 

      • 

Mow across the face of slopes - never up and down. 

      • 

Exercise extreme caution when changing direction on

         slopes.

12. Use extreme caution when stepping back or pulling the

      lawnmower towards you.
13. Never mow by pulling the mower towards you.
14. Stop the blades if the lawnmower has to be tilted for

      transportation when crossing surfaces other than grass

      and when transporting the lawnmower to and from the 

      area to be mowed.
15. Do not tilt the machine when starting or switching on the 

      motor, except if the machine has to be tilted for starting

      in long grass. In this case, do not tilt it more than

      absolutely necessary and tilt only the part which is away

      from the operator. Always ensure that both hands are in

      the operating position before returning the machine to 

      the ground.
16. Switch on the lawnmower according to instructions and 

      with feet well away from the blades.
17. Do not put hands or feet near or under rotating parts. 

      Keep clear of discharge opening at all times.
18. Never pick up or carry the lawnmower while the motor is 

      running. 
19. Keep all nuts, bolts and screws tight to be sure that the 

      lawnmower is in safe working condition.
20. Check the grass catcher frequently for wear or 

      deterioration.
21. Replace worn or damaged parts for safety.

1. Switch lever
2. Safety lock off button 
3. Cable retainer
4. Rear deflector
5. Motor
6. Wheel
7. Grass catcher
8. Cutting height adjustment lever
9. Lower handle bar

10. Cable cleat
11. Upper handle bar

INSTRUCTIONS FOR SAFE HANDLING

1. Make  sure  that  the  tool  is  only  connected  to  the  

   voltage marked on the name plate. 
2. Never use the tool if its cover or any bolts are missing.

    If the cover  or  bolts  have  been  removed,  replace 

    them  prior  to use. Maintain all parts in good working 

    order.  
3. Always secure tools when working in elevated 

    positions.
4. Never touch the blade or other moving parts during 

    use.
5. Never start a tool when its rotating component is in 

    contact with the workpiece.
6. Never lay a tool down before its moving parts have 

    come to a complete stop.  
7. 

ACCESSORIES: 

The  use  of  accessories  or 

    attachments other  than  those  recommended  in  these 

    instructions  might present a hazard. 
8. REPLACEMENT PARTS: When servicing use only 

    identical replacement parts. 

 

230V~50Hz

Voltage

2,000W

Power input

2,850min

-1

No load speed

460mm

Cutting width

25/30/40/50/60/70mm

Cutting height

50L

Collection box capacity

25.0kg

Net weight

Отзывы: