Ryobi RLT30CETG Скачать руководство пользователя страница 5

4

ENGLISH (Original Instructions)

SYMBOLS

Keep bystanders away

Keep all bystanders, especially children and pets, at least 15 m from the 

operating area.

Ricochet

Thrown objects can ricochet and result in personal injury or property damage.

No blade

Do not install or use any type of blade on a product displaying this symbol.

Petrol and lubricant

Use unleaded petrol intended for motor vehicle use with an octane rating of 

91 [(R + M) / 2] or higher. This product is powered by a 2-stroke engine and 

requires pre-mixing of petrol and 2-stroke lubricant.

Oil

Use synthetic 2-stroke oil for 2-stroke engines.

Mix petrol and oil

Mix the fuel mix thoroughly and also each time before refuelling.

Blade hazard

Warning! Risk of getting cut; operate carefully.

111 dB

90    dB

Guaranteed sound pressure level and sound power level.

The following signal words and meanings are intended to explain the levels of risk associated with this product.

    SYMBOL

SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will 

result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could 

result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may 

result in minor or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in 

property damage.

Содержание RLT30CETG















Отзывы: