Ryobi RLM12E33H, Оригинальное руководство пользователя

Страница: 5 / 28

condition.
■ Check the grass catcher frequently for
wear, holes, or deterioration.
■ Replace worn or damaged parts before
operating the product.
■ The product must be started with the user
behind the handlebars in the operator
safety zone. Never start the product if:
● all four wheels are not on the ground
● the grass discharge chute is exposed
and is not protected by the grass catcher
and grass discharge chute cover
● hands and feet of all persons are not
clear of the cutting enclosure
■ Never operate the product if the on/off
switch on the handlebar does not properly
start and stop the product.
■ Never attempt to lock the on/off switches in
the on position; this is extremely dangerous.
■ Do not force the product. It will do the job
better and safer at the speed for which it
was designed.
■ Stop the blade when crossing gravel
surfaces.
■ Do not pull the product backward unless
absolutely necessary. If you must back the
product away from a wall or obstruction,
first look down and behind to avoid tripping
or pulling the product over your feet.
■ Stop the motor and allow the blade to stop if
the mower has to be tilted for transportation
when crossing surfaces other than grass,
and when transporting the product to and
from the area to be mowed.
■ Never use the product with defective guards
or shields, or without safety devices, for
example, deflectors, and/or grass catcher,
in place.
■ Do not tilt the product when switching on
the motor or while the motor is running.
This exposes the blade and increases the
probability of objects being thrown.
■ Switch on the motor according to
instructions and keep hands and feet away
from cutting area. Do not put hands or feet
near or under rotating parts. Keep clear of
the discharge opening at all times. Do not
start the product when standing in front of
the discharge opening.
■ Never pick up or carry the product while it
is running.
■ Turn off the product and disconnect it from
the power supply. Make sure all moving
parts have come to a complete stop:
● before leaving the product unattended
(including disposal of grass clippings)
● before clearing blockages or unclogging
the discharge chute
● before checking, cleaning, or working on
the product
● before removing the grass catcher or
opening the grass discharge chute cover
● after striking a foreign object (inspect
the product for damage and make
repairs as necessary before restarting
and operating the product)
● whenever the product starts to vibrate
abnormally (check immediately).
– inspect for damage, particularly the
blades
– replace or repair any damaged parts
– check for and tighten any loose parts
■ Avoid holes, ruts, bumps, rocks, property
stakes, or other hidden objects. Uneven
terrain could cause a slip-and-fall accident.
OVERLOAD PROTECTION DEVICE
The product has an overload protection
device. When overloading is detected, the
product will automatically switch off. If the
overload protector is actuated, the motor must
be allowed to cool down for 5 to 10 minutes.
Turn off the power and remove the plug from
the supply. The blades are sharp, wear heavy-
duty gloves before touching. Make sure the
blade can rotate freely and is not jammed or
tight.
When the motor has cooled down, connect the
plug to the power supply, then turn the power
on. Press the start button and then the on/off
button to start the product. If the product will
still not start, bring it to an authorised service
centre for repair.
GENERAL MOWING TIPS
■ When cutting long grass, reduce walking
speed to allow for more effective cutting
3