Ryobi RED1220, Оригинальное руководство пользователя

Страница: 15 / 24

13
MAINTENANCE
1
2
3
2
1
3
1
2
3
REPLACING THE BLADE
1.
Disconnect the plug from the power
outlet.
WARNING: Replace the blade when
the blade wears down to the indication
line.
2. Insert the locking pin into the inner
flange washer. Using the combination
wrench, remove the blade nut, outer
flange washer and blade.
3. Install the new blade on the inner flange
washer and then reinstall the outer
flange washer, and blade nut. Secure
using the combination wrench. Make
approximately 3.5 turns after finger
tight to tighten the blade screw. The
recommended torque for the blade is ≥
25 Nm. Remove the locking pin.
WARNING: Make sure the blade
is correctly installed and securely
fastened before each use.