manualshive.com logo in svg
background image

OPERATOR'S MANUAL
ROUTER - RE170VS

DOUBLE INSULATED

972000-774

             Printed in U.S.A.

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road

Anderson SC 29625

Post Office Box 1207

Anderson SC 29622-1207

Phone 1-800-525-2579

RYOBI TECHNOLOGIES, INC.

P.O. Box 910

Cambridge, Ontario N1R 6K2

Phone 1-800-265-6778

EXTENSION CORD CAUTION

When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity to
handle the current the tool will draw. An undersized cord will cause
a drop in line voltage, resulting in overheating and loss of power.
Use the chart to determine the minimum wire size required in an
extension cord. Only round jacketed cords should be used.

When working with a tool outdoors, use an extension cord that is
designed for outside use. This is indicated by the letters "WA" on
the cord's jacket.

Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.

**Ampere rating

    (on tool data plate)

0-2.0

2.1-3.4

3.5-5.0

5.1-7.0

7.1-12.0 12.1-16.0

Cord Length

Wire Size (A.W.G.)

25'

16

16

16

16

14

14

50'

16

16

16

14

14

12

100'

16

16

14

12

10

      CAUTION: Keep the extension cord clear of the working
area. Position the cord so that it will not get caught on lumber,
tools or other obstructions while you are working with a power
tool.

**Used on 12 gauge - 20 amp circuit.

• SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or service,
simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent
facts when you call or visit. Please refer to the Service Center insert or call 1-800-525-2579
in the United States or 1-800-265-6778 in Canada for your nearest Ryobi Authorized Service
Center. You can also check our web site at www.ryobi.com for a complete list of Authorized
Service Centers.

• MODEL NO.

The model number of your tool will be found on a plate attached to the motor housing. Please
record the model number and serial number in the space provided below.

MODEL NUMBER RE170VS

SERIAL NUMBER

Содержание RE170VS
























Отзывы: