manualshive.com logo in svg
background image

GENERAL SAFETY WARNINGS

RESIDUAL RISKS

 

Read all safety warnings and all instructions.

 

Failure  to  follow  the  warnings  and  instructions 

may result in electric shock, fire and/or serious 

injury. Save all warnings and instructions for future 

reference.

 

Know your product. Read operator’s manual 

carefully.

 Learn its applications and limitations, as 

well as the specific potential hazards related to the 

product. Following the rule will reduce the risk of 

electric shock, fire, or serious injury.

 

Do not let familiarity gained from frequent use 

of tools allow you to become complacent and 

ignore tool safety principals.

 A careless action 

can  cause  severe  injury  within  a  fraction  of  a 

second.

 

Follow appliance manufacturer’s’ instructions 

regarding  operation  and  power.

  Use  of  the 

appliance different from those intended could result 

in a hazardous situation.

 

Use the correct product for the application.

 

Do not allow children to operate the product or 

play with the product as a toy.

 Close attention is 

necessary when used near children.

 

To reduce the risk of personal injury and electric 

shock, the product should not be played with or 

placed where small children can reach it.

 

The product is intended for household use only.

 

Use the product only for its intended use as 

described in this manual.

 

If the product is not working properly, has been 

dropped, damaged, left outdoors or dropped 

into water, return it to your nearest  service 

centre.

 

Only use attachments and accessories specified 

by the manufacturer.

 

Do not put any objects in ventilation openings.

 

Do not use the product with any opening blocked. 

Keep openings free of dust, lint, hair and anything 

that may reduce air flow.

 

Stay alert, watch what you are doing and use 

common sense when operating the product.

 Do 

not use while you are tired or under the influence 

of  drugs,  alcohol  or  medication. A  moment  of 

inattention may result in serious personal injury.

 

Do not place product near any heat sources 

such as radiators, heat registers, stoves, or 

other  products  (including  amplifiers)  that 

produce heat.

 

Do not place the product near fire or heat; it may 

explode.

 

Do not place the product in closed bookcases 

or  racks  without  proper  ventilation. 

Allow  a 

minimum distance of 5cm from any foreign object.

 

Risk of uncontrolled situations when used in 

ambient temperatures below 0°C (32°F) or above 

40 °C (104°F).

 

Keep the product dry, clean and free from oil and 

grease. 

Always use a clean cloth when cleaning.

 

Keep handles and grasping surfaces dry, clean 

and free from oil and grease. 

Slippery handles 

and grasping surfaces do not allow for safe handling 

and control of the tool in unexpected situations.

 

Do  not  overreach.  Keep  proper  footing  and 

balance at all times.

 This enables better control of 

the product in unexpected situations.

 

When  servicing  the  product,  use  only 

manufacturer’s replacement parts, accessories 

and  attachments. 

Follow  instructions  in  the 

Maintenance  section  of  the  manual.  Use  of 

unauthorised parts or failure to follow maintenance 

instructions may create a risk of shock or injury.

 

Save these instructions.

 Refer to them frequently 

and use them to instruct others who may use this 

tool. If you loan someone this tool, loan them these 

instructions  also

 

TRANSFER  PUMP  SAFETY 

WARNINGS

 

Do not let the pump run dry.

 

Do  not  remove  hose  while  pump  is  still 

operating.

 

Do not allow the product to run unattended.

 

Do not lift the pump by the hoses.

 

Periodically inspect the pump, hoses and intake 

filter. 

Ensure hoses and intake filter are free from 

mud, sand and debris. Remove the battery before 

inspecting.

 WARNING

This  appliance  is  not  intended  for  use  by  person 

(including children) with reduced physical, sensory 

or  mental  capabilities,  or  lack  of  experience  and 

knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person 

responsible for their safety.

Children should be supervised to ensure that they do 

not play with the appliance.

 

Ensure the water pump is disconnected from mains 

 WARNING

This product is not suitable for use with drinking 

(potable) water.

1

This  product  is  intended  for  pumping  water  in 

a Home Domestic application. Do not use it for 

corrosive, abrasive, explosive or dangerous liquids. 

Fluids other than water will damage the water pump 

and/or  create  a  fire  hazard.Failure  to  follow  all 

instructions listed below may result in electric shock, 

If the replacement of thesupply cord is necessary, 

this has to be done by the manufacturer or his 

agent inorder to avoid a safety hazard;The pump is 

to be supplied through a residual current device 

(RCD) having a rated residual operating current not 

exceeding 30mA

Содержание RCPP900













Отзывы: