6
Wear eye protection
Wear ear protection
Do not run product without tubes in
place.
Risk of long hair being drawn into air
inlet.
Risk of loose clothing being drawn into
air intake.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Warning! Hot surface.
Dangerous feed orifice. Rotating
fans. Keep hands and feet out of the
openings while the product is running.
Per ANSI B175.2
Blower mode: [79.8 dB(A)]
Vacuum mode:[79.2 dB(A)]
The bystander sound level is 79.8
dB(A) for blower mode, and 79.2 dB(A)
for vacuum mode per ANSI B175.2.
Use unleaded petrol intended for motor
vehicle use with an octane rating of 91
or higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also
each time before refueling.
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Take off blow tube from housing.
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
DANGER:
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.
DESCRIPTION
1. Lower vacuum tube (sold separately)
2. Vacuum bag (sold separately)
3. Adaptor (sold separately)
4. Cruise control
5. Throttle trigger
6. Upper vacuum tube (sold separately)
7. Vacuum tube screw (sold separately)
8. Fuel cap
9. Starter grip
10. Choke lever
11. Upper handle
12.
On/Off switch
13.
Muffler
14. Primer bulb
15. Vacuum handle
16. Combination wrench
17. Sweeper nozzle
18. Upper blower tube
19. Door release tab
20. Impeller cover door
21. High velocity nozzle with leaf scraper
22.
Tapered flange
23. Adaptor installed in vacuum bag (sold separately)
24. Raised locking tab
25. Locking tab
26. Vacuum bag assembly
27. Inlet cover tab
28. Vacuum opening
29. Locking tab on vacuum opening
30. Vacuum tube assembly
31. Screw for holding vacuum tube assembly
32. Quick start label
33.
Air filter cover
34.
Air filter cover securing knob
35.
Air filter
36. Spark plug boot
37. Spark plug
PRODUCT SPECIFICATIONS
Engine displacement
26 cc
Air velocity
325 km/h
Air volume
11 m
3
/min
Weight
4.3 kg
Rated power
0.75 kW
Engine speed (Max.)
10000 /min
Engine speed (Idle)
2800 - 4600 /min
Vibration
Blower mode
Idling
7.6 m/s
2
Racing
19.3 m/s
2
Equivalent vibration total value:
18.1 m/s
2