10
English (Original Instructions)
CAUTION
Be careful not to cross-thread the spark plug. Cross-
threading will seriously damage the engine.
CLEANING THE SPARK ARRESTER
See fi gure 18.
Follow these steps to clean the spark arrestor.
1. Locate the spark arrestor through the hole on the
muf
fl
er exit hole.
2. Remove the spark arrestor using needle-nosed pliers.
3. Clean the spark arrestor with a small wire brush.
4. Replace the spark arrestor.
STORING THE PRODUCT
Short term storage
■
Clean all foreign material from the product.
■
Store the product in a well-ventilated place that is
inaccessible to children.
Long term storage (1 month or longer)
■
Drain all of the fuel from the tank into a container
approved for gasoline.
■
Run the engine until it stops.
■
Clean all foreign material from the product.
■
Store the product in a well-ventilated place that is
inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
■
Abide by all government and local regulations for the
safe storage and handling of petrol.
WARNING
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify any
affections or damage with it. Any part that is damaged
should be properly repaired or replaced by an
authorized service centre.
SPECIFICATIONS
Weight
- Without fuel, cutting
attachment and harness
6.10 kg
- Without fuel with string head
7.21 kg
- Without fuel with blade
7.06 kg
Fuel tank volume
620 ml or (0.62 L)
Cutting swath
- String head
457 mm
- Blade
256 mm
Recommended torque for
blade retention
>=11 Nm
Engine displacement
25.4 cm
3 /cc
Line diameter
2.4 mm or 2.7 mm
Maximum engine performance
(in accordance with ISO 8893)
0.9 kW
Maximum rotational frequency
of the spindle
10,000 min
-1
Engine speed (rotational
frequency) at recommended
max. spindle rotational
frequency
12,000 min
-1
Engine speed (rotational
frequency) at idle
2,600-3,500 min
-1
Fuel consumption (in
accordance with ISO 8893) at
max. engine performance
0.54kg/h
Speci
fi
c fuel consumption (in
accordance with ISO 8893) at
max. engine performance
0.60 g/kW.h
Trimmer
Brushcutter
Vibration (in accordance with ISO 22867)
Right handle
- Idling
3.6 m/s
2
4.7 m/s
2
- Racing
4.8 m/s
2
6.4 m/s
2
- Equivalent vibration total
value
4.3 m/s
2
5.6 m/s
2
Left handle
- Idling
3.7 m/s
2
5.0 m/s
2
- Racing
7.6 m/s
2
3.6 m/s
2
- Equivalent vibration total
value
5.9 m/s
2
4.3 m/s
2
Uncertainty of vibration
measurement
1.5 m/s
2
Noise emission (in accordance with ISO 22868)
A-weight emission sound pressure level at the operator's
position
- Idling
76.8 dB(A)
75.8 dB(A)
- Racing
101.8 dB(A) 100.4 dB(A)
- Equivalent
98.8 dB(A)
97.4 dB(A)
Uncertainty
2.5 dB(A)
A-weight emission sound power level
- Idling
84.8 dB(A)
- Racing
107.5 dB(A)
- Equivalent
107.5 dB(A)
Uncertainty
2.5 dB(A)