background image

English

2

under normal circumstances, return both the battery pack 
and charger to the nearest Ryobi authorised service 
centre for electrical check.

Battery pack

Compatible charger

(not included)

RB18L15

RB18L40

RB18LL40

BCL-1418

BCL14181H

BCL14183H

BCL1418IV

*

BCS-618

BCL1800

BCS618G

*

 for vehicles' 12V DC outlets

 WARNING

Only charge in compatible 18V chargers. Use of 
other chargers may result in fi re, damager or serious 
personal injury.

 

Press down on the battery pack to ensure contacts on 
the battery pack engage properly with the contacts in 
the charger.

 

Connect the charger to the power supply. Make sure it 
is the required power supply.

 

Make sure the latches on each side of the battery pack 
snap into place and the battery pack is secured in the 
charger before beginning operation.

 

Place the battery pack in the charger aligning raised 
rib on the battery pack with the groove in the charger.

 

The battery pack will become slightly warm to the 
touch while charging. This is normal and does not 
indicate a problem.

NOTE:

 Do not place the charger and battery pack in an 

area of extreme heat or cold. They will work best at normal 
room temperature.

 

Place charger on hard surface not soft (carpet, etc.), 
when charging batteries.

 

When batteries become fully charged, unplug the 
charger from power supply and remove the battery 
pack.

 

To remove battery pack from the charger, depress the 
latches on each side of the battery pack.

 

After normal usage, a minimum of 1 hour charging 
time is required to fully recharge the battery pack.

CHARGING A HOT BATTERY PACK

When using a tool continuously, the battery pack will 
become hot. A hot battery pack should be let to cool before 

attempting to recharge. When a hot battery pack is placed 
on the charger, the charger may indicate the battery pack 
is not ready to charge. When the battery pack cools, the 
charger will automatically begin charging.

CHARGING A COOL BATTERY PACK

If the battery is below normal temperature range, the red 
LED will begin fl ashing and the green LED will be off. 
When the battery warms to a temperature of more than 
0°C, the charger will automatically begin charge mode.

CHARGE STATUS

See Fig. 1.

To display the amount of charge left in the battery, press 
the Charge level indicator button.

Charge level indicator

Amount of charge left

0-10%

10-25%

   

25-50%

 

50-75%

   

75-100%

MAINTENANCE

The batteries have been designed to provide maximum 
trouble-free life. However, like all batteries, they will 
eventually wear out. 

DO NOT

 disassemble battery pack 

and attempt to replace the batteries. Handling of these 
batteries, especially when wearing rings and jewellery, 
could result in serious burns.

To obtain the longest possible battery life, remove the 
battery pack from the charger once it is fully charged and 
ready for use.

STORAGE

For battery storage longer than 30 days:

 

Store the battery pack where the tem per a ture is below 
27°C.

Содержание RB18L40








Отзывы: