17
Maintenance
6
7
1
2
8
Blade bolt tightening
torque (35~40 Nm)
6. Remove the blade nut, spacer, and
washer. Remove and properly dispose of
the old blade.
7. Install the new blade, washer, spacer,
and nut.
8. Insert the blade change U-bolt into the
cutting deck holes to prevent the blade
from spinning during tightening the blade
nut. Hand-tighten the nut until the blade is
secured and does not shake, then use a
spanner to further tighten the nut to
35
-
40
Nm torque.
