manualshive.com logo in svg

Ryobi R2-PWWDV-G, Оригинальное руководство пользователя

Поделиться
Скачать
Ryobi R2-PWWDV-G Скачать руководство пользователя страница 50

50

Correcting Problems

10.2 Correcting problems at the wet/dry vacuum cleaner

Problem

Possible cause

Solution

Appliance suddenly sets suction 
power back to minimum.

The integrated overheating 
protection has tripped (possibly due 
to blocked suction channels, filters, 
or similar).

Switch the appliance off and pull 
the appliance plug out of the 
socket. Eliminate the cause of 
overheating (e. g. remove blockage 
and/or empty dirt tank). Wait for 
about 45 minutes. After the 
appliance has cooled off, you may 
switch it on again.

The integrated float has triggered 
due to the level of the dirty water in 
the dirt tank being too high.

Empty the dirt tank, Chapter 5.4, 
“Switching off and emptying the 
dirt tank“.

The cleaning results are 
unsatisfactory in spite of the 
appliance working correctly.

The dirt tank is full.

Empty the dirt tank, Chapter 5.4, 
“Switching off and emptying the 
dirt tank“.

The motor protection filter is dirty.

Clean the motor protection filter, 
Chapter 9.4, “Cleaning/changing the 
motor protection filter of the vac“.

Suction nozzle or suction hose are 
blocked.

Remove the obstruction.

Dust comes out.

The motor unit has not been put on 
properly.

Put the motor unit powerfully onto 
the dirt tank until you can hear and 
feel both retaining clips snap into 
place.

The motor protection filter has not 
been inserted when dry vacuum 
cleaning.

Change/clean the motor protection 
filter, Chapter 9.4, “Cleaning/
changing the motor protection filter 
of the vac“.

The motor protection filter has 
been inserted, but is damaged.

Change the motor protection filter, 
Chapter 9.4, “Cleaning/changing the 
motor protection filter of the vac“.

NOTE:

 If you cannot solve the problem using this table, contact our customer service department and describe 

the problem to us. Our staff are specially trained for such cases and can help you get to the bottom of the matter 
in a targeted manner, and solve the problem.

Содержание R2-PWWDV-G


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды