background image

2

Original Instructions

IMPORTANT!

It is essential that you read the instructions 

in this manual before assembling, operating, 

and maintaining the product.

Subject to technical modification.

Safety, performance, and dependability have 

been given top priority in the design of your 

cordless gutter blower.

INTENDED USE

The cordless gutter blower is intended only 

for outdoor use, in dry, and well-illuminated 

conditions.

The product is not intended to be used by 

children or persons with reduced physical, 

mental or sensory capabilities.

The product is intended for blowing light debris 

including leaves, grass, and other gutter 

refuse.

This blower should only be used to clear dry 

leaves and dry debris. The use of this blower 

around  wet  leaves,  moisture  and  overflowing 

gutters can be a safety concern and may 

cause harm or damage the operator or tool. 

Use of this blower around wet leaves, moisture 

and  overflowing  gutters  can  void  the  product 

warranty.

Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

 

WARNING!

 Read all safety warnings and all 

instructions. Failure to follow the warnings and 

instructions  may  result  in  electric  shock,  fire, 

and/or serious injury. Save all warnings and 

instructions for future reference.

 

WARNING!

 Never allow children or people 

who are unfamiliar with these instructions to 

use the product. Local regulations may restrict 

the age of the operator.

TRAINING

 

Read the instructions carefully. Be familiar 

with the controls and the correct use of the 

product.

 

Keep in mind that the operator or user 

is responsible for accidents or hazards 

occurring to other people or their property.

 

Do not use the product while tired, ill, or 

under the influence of drugs, alcohol, or 

medication.

PREPARATION

 

WARNING! 

Check that all the shaft 

couplings on the extension shaft and tool are 

securely fastened before each use and at 

frequent intervals.

 

Some regions have regulations that restrict 

the use of the product to some operations. 

Check with your local authority for advice.

 

Wear hearing protection at all times while 

operating the product. The product is noisy, 

and not strictly adhering to precautions to 

limit your exposure and to reduce noise 

may result to permanent hearing injury.

 

Wear full eye protection at all times while 

operating the product. Wear a full face 

mask or fully enclosed goggles. Normal 

spectacles or sunglasses are not adequate 

protection. Objects can be thrown at high 

speed by the powerful air jet at any time and 

may rebound from hard surfaces toward the 

operator.

 

While operating the product, always wear 

substantial footwear and long trousers. 

Do not operate the product when barefoot 

or wearing open sandals. Avoid wearing 

clothing with loose fitting or that has hanging 

cords or ties.

 

Do not wear loose clothing or jewellery that 

can be drawn into the air inlet. Secure long 

hair so it is above shoulder level to prevent 

entanglement in moving parts.

 

Before each use, ensure that all controls 

and safety devices function correctly. Do 

not use the product if the off switch does not 

stop the product.

 

Operate the product in the recommended 

position and only on a firm and level surface.

 

Do not operate the product on a paved or 

gravel surface where ejected material could 

cause injury.

 

Before each use, always inspect the housing 

for damage. Ensure that guards and handles 

are in place and properly secured. Replace 

worn or damaged components in sets to 

preserve balance. Replace damaged or 

unreadable labels.

 

Never operate the product while people, 

especially children, or pets are nearby.

 

Keep all cooling air inlets clear of debris.

 

Injuries may be caused or aggravated by 

prolonged use of a tool. When using any 

tool for prolonged periods, ensure you take 

regular breaks.

 

Ensure that the gutter blower is correctly 

located in a designed working position 

before starting the product.

Содержание R18EZBLW

















Отзывы: