background image

2

 

Ŷ

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool.

 

Power tools are dangerous in the hands of untrained 
users.

 

Ŷ

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the 
power tool’s operation. If damaged, have the power 
tool repaired before use.

 Many accidents are caused 

by poorly maintained power tools.

 

Ŷ

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control.

 

Ŷ

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed.

 Use of the power tool for operations 

different from those intended could result in a 
hazardous situation.

 

Ŷ

Keep handles and grasping surfaces dry, clean 
and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

 

Ŷ

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

 

Ŷ

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

 

Ŷ

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another.

 

Shorting the battery terminals together may cause 
burns or a fire.

 

Ŷ

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

 

Liquid ejected from the battery may cause irritation or 
burns.

 

Ŷ

Do not use a battery pack or tool that is damaged or 
modified.

 Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or 
risk of injury.

 

Ŷ

Do not expose a battery pack or tool to fire 
or excessive temperature.

 Exposure to fire or 

temperature above 130°C may cause explosion.

 

Ŷ

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature 
range specified in the instructions.

 Charging 

improperly or at temperatures outside the specified 
range may damage the battery and increase the risk 
of fire.

SERVICE

 

Ŷ

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This will ensure that the safety of the power tool is 
maintained.

 

Ŷ

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

DRILL DRIVER SAFETY WARNINGS

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

 

Ŷ

Hold the power tool by insulated gripping surfaces, 

when performing an operation where the cutting 

accessory or fasteners may contact hidden wiring

Cutting accessory or fasteners contacting a “live” wire 

may make exposed metal parts of the power tool “live” 

and could give the operator an electric shock.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL 
BITS

 

Ŷ

Never operate at higher speed than the maximum 

speed rating of the drill bit. 

At higher speeds, the 

bit is likely to bend if allowed to rotate freely without 

contacting the workpiece, resulting in personal injury.

 

Ŷ

Always start drilling at low speed and with the bit 

tip in contact with the workpiece. 

At higher speeds, 

the bit is likely to bend if allowed to rotate freely without 

contacting the workpiece, resulting in personal injury.

 

Ŷ

Apply pressure only in direct line with the bit and do 

not apply excessive pressure. 

Bits can bend causing 

breakage or loss of control, resulting in personal injury.

ADDITIONAL SAFETY WARNINGS

 

Ŷ

Clamp workpiece with a clamping device.

 

Unclamped workpieces can cause severe injury and 
damage.

 

Ŷ

Ambient temperature range for tool during operation is 

between 0°C and 40°C.

 

Ŷ

Ambient temperature range for tool storage is between 

0°C and 40°C.

 

Ŷ

The recommended ambient temperature range for the 

charging system during charging is between 10°C and 

38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

7R UHGXFH WKH ULVN RI ¿UH SHUVRQDO LQMXU\ DQG SURGXFW

damage due to a short circuit, never immerse your 

WRRO EDWWHU\ SDFN RU FKDUJHU LQ ÀXLG RU DOORZ D ÀXLG WR
ÀRZ LQVLGH WKHP &RUURVLYH RU FRQGXFWLYH ÀXLGV VXFK

as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

 

Ŷ

Ambient temperature range for battery during use is 
between 0°C and 40°C.

 

Ŷ

Ambient temperature range for battery storage is 
between 0°C and 20°C.

Содержание R18DDP2













Отзывы: