6
7
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
Alternating Current
Type of current
Direct Current
Type or a characteristic of current
no
No Load Speed
Rotational speed, at no load
Class II Construction
Double-insulated construction
.../min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Wear eye protection when operating this equipment.
Safety Alert
Precautions that involve your safety.
Gloves
Wear non-slip, heavy-duty protective gloves when handling the
blades.
Moving Parts
Keep hands away from moving parts.
50' 15m
Keep Bystanders Away
Keep all bystanders at least 50 ft. away.
Kickback
DANGER! Beware of kickback.
Hot Surfaces
To reduce the risk of injury or damage, avoid contact with any
hot surface.
Electric Shock
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Sharp Blade
Sharp cutting blades. To prevent serious injury, do not touch cutting
blades.
