Ryobi OWS1870, Оригинальное руководство пользователя

Страница: 11 / 24

9
1
2
3
4
3
7 8
GETTING STARTED
Adjusting the spray nozzle.
The spray nozzle can be adjusted from a stream to a fan
spray.
■ Turn the spray nozzle counter-clockwise for a stream
spray.
■ Turn the spray nozzle clockwise for a fan spray.
Turn the sprayer on.
The spray nozzle can be adjusted from a stream to a fan
spray.
■ To start the flow of liquid at the spray wand, press the
trigger.
■ To stop the flow of liquid at the spray wand, release the
trigger.
Attach the hose to the handle.
1. Insert the hose end into the opening on the threaded
coupler. Make sure the connection is secure.
2. Slide the nut over the hose and threaded coupler. Hand
tighten. Do not overtighten.
Attach the hose to the spray tank.
3. Insert the hose end into the hose connector. Make sure
the connection is secure.
4. Slide the nut over the opening and hose end. Hand
tighten. Do not overtighten.
2
1
4
5
3
4
GETTING STARTED
To turn off the product.
Turn off the product by depressing the on/off button.
Filling the tank.
1. Unscrew the tank cover by turning it counter-clockwise.
2. Remove the tank cover from the tank and set aside.
3. Carefully pour the desired amount of liquid into the tank
(up to 7.5 litres).
NOTE: Spray solutions may be premixed and poured
into the sprayer, using a funnel if needed.
If using a measuring container other than the measuring
cap, or if using a funnel to fill the tank, be sure to
thoroughly clean and rinse these items after use. If
premixing the spray solution, rinse the container used
for mixing.
4. Re-attach the tank cover back onto the sprayer.
5. Turn the tank cover clockwise and tighten securely.