3
Original Instructions
BATTERY PACK SAFETY WARNINGS
■
Recharge the battery pack only with the charger
specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire
when used with another battery pack.
■
When battery pack is not in use, keep it away from other
metal objects, such as paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery pack terminals together may cause burns or a
fire.
■
Keep the battery pack and the charger away from wet
and damp conditions.
■
Use the product only with battery packs specified in this
manual. Use of any other battery packs may create a
risk of injury and fire.
■
Under abusive conditions, liquid may be ejected from
the battery pack; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, seek
medical help. Liquid ejected from the battery pack may
cause irritation or burns.
■
The battery pack has overheat protection. Excessive
temperatures will cause the battery to stop powering the
product. If the battery pack is too warm, allow it to cool
down before resuming operation. If the product still does
not work, recharge the battery pack.
NOTE:
The battery pack LED indicator will not work
if the battery pack protection feature has caused the
battery pack to stop powering the product. Release
the on-off button or remove the battery pack from the
product and the battery pack LED indicator will resume
normal function.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
Do not splash water to the product. It may
damage the battery pack.
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool,
battery pack or charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach, or bleach-
containing products, etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the battery pack, and allow
the product to cool down. Disconnect the product from
the water supply before storing or transporting.
■
Remove water from all hoses and the pump, and empty
the detergent tank before storing the product.
■
Neatly coil the siphon hose, and store it with the power
washer.
■
Remove all foreign
materials from the product. Store it
in a cool, frost-free, dry, and well-ventilated place that is
inaccessible to children. Do not store the product near
the furnace or other sources of heat that could dry out
the pump seals. Keep the product away from corrosive
agents, such as garden chemicals and de-icing salts. Do
not store the product outdoors.
■
For transportation in a vehicle,
secure the product
against movement or falling to prevent injury to persons
or damage to the product.
WARNING!
Store the product indoors only. Storing in
an area with temperature below 0° will damage the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with local and
national provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. Have
the product serviced by an authorised service centre only.
When servicing, use only original replacement parts.
■
Turn off the product, remove the battery pack, and allow
the product to cool down. Disconnect the product from
the water supply:
●
before cleaning the product
●
before maintaining the product
●
before replacing spare parts
■
You may make adjustments or repairs described in this
manual. For other repairs, contact an authorised service
centre.
■
Regularly inspect and maintain the product for safe
operation. Ensure that the battery compartment is
properly assembled, tightly closed, and frequently
check for damages. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
■
If the product is to be stored unused for a long period,
the batteries should be removed.
SAFETY DEVICES
HANDLE GRIP
The handle grip has a gripping surface that provides added
control of the spray wand and helps reduce fatigue.
LOCK-OUT BUTTON
The lock-out button locks the switch trigger and prevents
unintentional opening of the high-pressure jet.
SYMBOLS ON THE PRODUCT
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye and hearing protection.
