manualshive.com logo in svg
background image

3

ADDITIONAL SAFETY WARNINGS

 WARNING

Some regions have regulations that restrict the use of 

the product. Check with your local authority for advice.

 

Read the instructions carefully. Be familiar with all 

controls and the proper use of the product.

 

Keep bystanders, children, and pets 15 m away from 

the area of operation. Stop the product if anyone enters 

the area.

 

Never use the product while tired, ill, or under the 

influence of alcohol, drugs, or medication.

 

Keep in mind that the operator or user is responsible 

for accidents or hazards occurring to other people or 

their property.

 

Wear heavy, long trousers, boots, and gloves. Do not 

wear loose-fitting clothing, short trousers, or jewellery of 

any kind. Do not use the product with bare feet.

 

Secure long hair so that it is above shoulder level to 

prevent entanglement in moving parts.

 

Before use and after any impact, check that there are 

no damaged parts. A defective switch or any part that 

is damaged or worn should be properly repaired or 

replaced by an authorised service centre.

 

Make sure that the cleaning attachment is properly 

installed and securely fastened.

 

Never operate the product unless all guards, deflectors, 

and handles are properly and securely attached.

 

Exercise extreme caution when using the product.

 

Maintain a proper grip on the product whenever the 

motor is running.

ADDITIONAL BATTERY SAFETY WARNINGS

 

 WARNING

To reduce the risk of fire, personal injury, and product 

damage due to a short circuit, never immerse your 

tool, battery pack or charger in fluid or allow a fluid to 

flow  inside  them.  Corrosive  or  conductive  fluids,  such 

as seawater, certain industrial chemicals, and bleach 

or bleach-containing products, etc., can cause a short 

circuit.

TRANSPORTATION AND STORAGE

 

Stop the product, remove the battery pack, and allow it 

to cool down before storing or transporting.

 

Clean all foreign material from the product. 

 

Do not store or transport the product with battery packs 

fitted; remove and secure the battery packs separately. 

Store the product in a cool, dry, and well-ventilated 

place that is inaccessible to children. Keep the product 

away from corrosive agents, such as garden chemicals 

and de-icing salts. Do not store the product outdoors.

 

Keep the product out of the reach of children.

 

For transportation in vehicles, secure the product 

against movement or falling to prevent injury to persons 

or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with local and 

national provisions and regulations. Follow all special 

requirements on packaging and labelling when transporting 

batteries by a third party.
Ensure that no battery packs can come in contact with 

other batteries or conductive materials while in transport 

by protecting exposed connectors with insulating, non-

conductive caps or tape. Do not transport battery packs 

that are cracked or leaking. Check with the forwarding 

company for further advice.

MAINTENANCE

 

 WARNING

Use only original manufacturer’s replacement parts, 

accessories, and attachments. Failure to do so can cause 

possible injury, can contribute to poor performance, and 

may void your warranty.

 

 WARNING

Servicing requires extreme care and knowledge 

and  should  be  performed  only  by  a  qualified  service 

technician. Have the product serviced by an authorised 

service centre only. When servicing, use only original 

replacement parts.

 

Turn off the product and remove the battery pack before 

conducting any maintenance or cleaning work.

 

You may make adjustments and repairs described in 

this manual. For other repairs, contact an authorised 

service agent.

 

Check all nuts, bolts, and screws at frequent intervals 

for proper tightness to ensure that the product is in safe 

working condition. Any part that is damaged should be 

properly repaired or replaced by an authorised service 

centre.

 

Bring the product to an authorised service centre to 

replace damaged or unreadable labels.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 

impossible to completely eliminate certain residual risk 

factors. The following hazards may arise during use, and 

the operator should pay special attention to avoid the 

following: 

 

injury caused by vibration

 

Hold the product by designated handles and restrict 

working time and exposure.

 

injury caused by exposure to noise

 

Wear hearing protection and limit exposure.

 

injury caused by flying debris

 

Wear eye protection at all times.

Содержание OSC1800

























Отзывы: