Ryobi ORM1800, Оригинальное руководство пользователя, Страница: 18 / 24

1
2
2
ADJUSTING THE BOTTOM BLADE
1. Rotate the adjustment bolts clockwise
using an Allen key to decrease the gap
between the bottom blade and the reel
blades. Rotate adjustment bolts counter-
clockwise to increase the gap.
NOTE: Ensure the bottom blade does
not come in contact with the reel blades.
2. Manually rotate the wheel forward
direction to engage the reel blades. Feed
a piece of paper from edge to edge to
check the entire bottom blade assembly.
NOTE: Use a piece of paper with a
thickness of 0.1 - 0.3 mm to check if the
new blade is properly installed.
NOTE: For optimal performance, check
the sharpness of the blades before and
after each use by feeding a piece of paper
between the reel blades and bottom blade.
The paper should be cleanly sliced between
the reel blades and bottom blade. Adjust the
bolts if necessary.
WARNING: If the reel blades strike a foreign
object and become damaged, this may also
damage the bottom blade. The gap between
the reel blades and the bottom blade may
increase, which will affect the cutting
performance of the product. The damaged
reel blades should be properly repaired or
replaced by an authorised service centre.
Adjusting the bottom blade
1
16
MAINTENANCE