Ryobi OPP18, Оригинальное руководство пользователя, Страница: 7 / 28

5
For damaged parts Before each use
For loose fasteners Before each use
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■ injury caused by vibration
– Hold the product by designated handles and restrict
working time and exposures.
■ injury caused by exposure and noise
– Wear hearing protection and limit exposure.
■ injury from contact with the exposed saw teeth of the
chain
■ injury caused by kickback or sudden and unforeseen
movement of the guide bar
■ injury caused by ejected parts of the saw chain
■ injury caused by thrown-off parts of the workpiece
(wood chips and splinters)
■ injury caused by dust and particles
■ injury caused by skin contact with the lubricant or oil
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
WHAT’S IN THE BOX
See page 8.
■ Pruner attachment x 1
■ Scabbard / Bar cover x 1
■ Wrench x 1
■ Manual
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy duty gloves.
10m
Electrical hazard, at least 10 m away
from the overhead electric-power lines
Do not expose the product to rain or
damp condition.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Bar and chain lubricant
Moving direction of the chain
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Always remove the insert before using
the product.
Quick release tab
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
ENSURE CORRECT
CHAIN TENSIONING
Before use, the chain should only
pull away from the bar 3mm –
4mm. If applied too tight the chain
may not function correctly, resulting
in damage. If using the pruner for
an extended period, monitor the
tensioning every 10 minutes.
Chain tensioning label
96
Guaranteed sound power level