Ryobi ODT1800, Оригинальное руководство пользователя

Страница: 5 / 20

3
CORDLESS DIGGING TOOL SAFETY WARNINGS
WARNING
Maintain a firm grip on the handles with both hands while
using the auger. Keep the auger bit away from your body
and below waist level.
■ Replace auger if it is cracked, bent, or damaged in
any way. Be sure the auger is properly installed and
securely fastened. Failure to do so can cause serious
injury.
■ Make sure the handles are properly and securely
attached.
■ Consider the environment in which you are working.
Keep the working area free from electric cables or
underground utilities.
■ Use only the manufacturer’s replacement augers. Do
not use any other attachment.
■ Replace the auger bit immediately if there are any
cracks or any damage.
■ Do not touch the auger bit when the product is switched
on.
■ If the auger bit jams, stop the product immediately.
■ Maintain a firm grip on both handles during operation.
■ Do not use the product with the handle above waist
level to avoid serious chest injuries when the product
hits a hard object.
■ Always keep the handles dry and clean.
■ Ensure all handles are properly fitted and are in good
condition.
■ Do not start using the product until you have a clear
work area and secure footing.
■ Do not modify the product in any way or use it to power
any attachments or devices not recommended by the
manufacturer.
■ Before starting the product, make sure the bit is not
contacting any object.
■ Do not use the product when there is a possibility of
thunderstorm or lightning. Store the product safely
indoors.
■ Turn off the product and remove the battery pack. Make
sure all moving parts have come to a complete stop:
● before servicing
● before leaving the product unattended
● before clearing a blockage
● before checking, cleaning, and working on the
product
● before changing accessories
● after striking a foreign object
● whenever performing maintenance
● whenever the product starts to vibrate
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack, or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemical, and bleach
or bleach-containing products, etc., can cause a short
circuit.
TRANSPORTATION AND STORAGE
■ Stop the product, remove the battery pack, and allow it
to cool down before storing or transporting.
■ Clean all foreign materials from the product. Store it in a
cool, dry, and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents, such
as garden chemicals and de-icing salts. Do not store
outdoors.
■ For transportation, secure the product against
movement or falling to prevent injury to persons or
damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, contribute to poor performance,
and may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service, we suggest you bring the
product to the nearest authorised service centre. When
servicing, use only original replacement parts.
WARNING
The auger bit is very sharp. To prevent personal injury,
exercise extreme caution when cleaning, fitting, or
removing the auger bit. Always wear protective gloves
when performing maintenance on the bit.
■ Switch off and remove the battery pack before
conducting any maintenance or cleaning work.
■ You may only make adjustments or repairs described
in this manual. For other repairs, contact the authorised
service centre.
■ After each use, clean the body and handles of the
product with a soft, dry cloth.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk