background image

5

SPECIFIC SAFETY RULES

Inspect for and remove all nails from lumber be-
fore planing. 

Following this rule will reduce the risk

of serious personal injury.

Drugs, alcohol, medication. Do not operate tool
while under the influence of drugs, alcohol, or
any medication. 

Following this rule will reduce the

risk of electric shock, fire, or serious personal injury.

Save these instructions. Refer to them frequently
and use them to instruct others who may use
this tool. If you loan someone this tool, loan them
these instructions also.

SYMBOLS

WARNING:

Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and

other masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.

Important: 

Some of the following symbols may be used on your tool. Please study them and learn their meaning.

Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL

NAME

DESIGNATION / EXPLANATION

V

Volts

Voltage

A

Amperes

Current

Hz

Hertz

Frequency (cycles per second)

W

Watt

Power

min

Minutes

Time

Alternating Current

Type or a characteristic of current

n

0

No Load Speed

Rotational speed, at no load

Class II Construction

Designates Double Insulated Construc-
tion tools

.../min

Revolutions or Reciprocation Per Minute

Revolutions,  strokes,  surface  speed,
orbits etc. per minute

Safety  Alert  Symbol

Indicates danger, warning or caution. It

means attention!!! Your safety is in-
volved.

Wet Conditions Alert

Do not expose to rain or use in damp

locations.

Содержание HPL50



















Отзывы: