Ryobi HLD-12, Руководство по эксплуатации для владельца

Страница: 6 / 8

5
OPERATING
NEVER COVER THE AIR VENTS SINCE THEY MUST ALWAYS
BE OPEN FOR PROPER MOTOR COOLING.
DRILLING IN WOOD
To prevent splintering around the drilled hole on the reverse side
of the work piece, place scrap lumber beneath the material to be
drilled.
DRILLING IN METAL
Metals such as steel sheets, brass and aluminum sheets, stain-
less steel and pipe may also be drilled. Mark the point to be
drilled with a nail or punch.
DRIVING SCREW
Match the bit and screw size to prevent damage to the screw
head.
For removing screws, push the forward/reverse lever towards the
left side of the drill.
MAINTENANCE
After use, check the tool to make sure that it is in top condition.
It is recommended that you take this tool to a RYOBI Authorized
Service Center for a thorough cleaning and lubrication at least
once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS
IN MOTION.
ALWAYS REMOVE THE BATTERY FROM THE TOOL BE-
FORE CHANGING REMOVABLE OR EXPENDABLE PARTS
(BIT...ETC.), LUBRICATING OR WORKING ON THE UNIT.
WARNING!
To ensure safety and reliability, all repairs should be per-
formed by an AUTHORIZED SERVICE CENTER or other
QUALIFIED SERVICE ORGANIZATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.