background image

Page 18

MAINTENANCE

REMOVING THE CHUCK

See Figures 16, 17, and 18.

Follow these steps to remove the chuck.

Lock the trigger switch by placing the rotation selector
in the center position.

Insert a 5/16 inch or larger hex key wrench into the
chuck of the drill and tighten the chuck jaws securely.

Tap the hex key wrench sharply with a mallet in a
clockwise direction. This will loosen the screw in the
chuck for easy removal.

Open the chuck jaws and remove the hex key wrench.

Remove the chuck screw by turning it in a clockwise
direction.

Note: 

The screw has left hand threads.

Insert the hex key wrench in the chuck and tighten the
chuck jaws securely.

Tap sharply with a mallet in a counterclockwise direc-
tion. This will loosen chuck on the spindle. It can now
be unscrewed by hand.

TIGHTENING THE CHUCK

The chuck may become loose on the spindle and begin to
shake when using the drill. Also, the chuck screw may
become loose causing the chuck jaws to bind and prevent
them from closing.

Follow these steps to tighten the chuck.

Lock the trigger switch by placing the rotation selector
in center position.

Open the chuck jaws.

Insert the hex key wrench into the chuck and tighten
the chuck jaws securely.

Tap the hex key wrench sharply with a mallet in a
clockwise direction. This will tighten chuck on the
spindle.

Open the chuck jaws and remove the hex key wrench.

Tighten the chuck screw.

Note:

 The chuck screw has left hand threads.

HEX KEY

CHUCK JAWS

KEYLESS CHUCK

SCREWDRIVER

MALLET

15

15

Fig. 17

Fig. 18

Fig. 16

15

Содержание HD1830





















Отзывы: