Ryobi FL1800, Руководство оператора

Страница: 7 / 10

Page 7
OPERATION
Fig. 3
LENS COVER
BULB
BULB STORAGE
AREA
Fig. 2
SWITCH
TRIGGER
180
°
ROTATING HEAD
SWITCH
See Figure 2.
To turn your flashlight on and off, depress switch trigger.
180 ° ROTATING HEAD
See Figure 2.
Your flashlight has the feature of rotating the head 180 °
back and forth.
BULB REPLACEMENT
See Figure 3.
When purchasing replacement bulb, request recommended
part number 780175002.
TO REPLACE BULB:
■
Allow bulb to cool.
■
Remove battery pack from flashlight.
■
Remove lens cover by turning cover in counterclockwise
direction, then remove cover.
■
Remove old bulb from spring.
■
Position new bulb in spring.
■
Replace lens cover.
■
Replace battery pack.
Note : For your convenience, your flashlight has a spare
bulb storage area. It is located behind the lens cover.
See Figure 3.
WARNING:
Lens and bulb become hot during use:
•
During or immediately after use, don't lay flashlight
flat on lens surface or place lens area in contact with
a plastic or fabric covered surface.
•
Handle flashlight with care around any flammable
surface.
•
Let flashlight cool for several minutes after use before
changing bulb.
•
Do not use or permit use of flashlight in bed or sleeping
bags. This flashlight lens can melt fabric and a burn
injury could result.