8
GB
F
D
E
English
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
RO
PL
SPECIFICATIONS
Input
110 V / 230 V ~ 50 Hz
Power 750
W
No load speed
16000 min-
1
Max. planing depth
2.5 mm
Max. planing width
82 mm
Max. rabbet depth
11 mm
Weight 2.7
kg
Be sure to check the nameplate on the product, because
the voltage is subject to change depending on the area in
which in the product is to be used.
DESCRIPTION
1.
Loop handle (Front handle)
2.
Exhaust direction knob
3.
Depth adjust knob
4.
Exhaust port
5.
Trigger switch
6.
Rear handle
7.
Lock-off button
8.
Collar
9.
Dust bag
10. Front shoe
11. Blade
12. Knob bolt
13. Bracket
14. Edge guide
15. Knob nut
16. Carriage head bolt
17. Blade holder
18. Belt cover
19. Belt
20. Small pulley
21. Large pulley
22. Palm handle (Front handle)
FEATURES
WARNING
If any parts are missing, do not operate your
planer until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
KNOW YOUR PLANER
Before attempting to operate your planer, familiarize
yourself with all operating features and safety
requirements. However, do not let familiarity with the tool
make you careless.
Your planer is compact and lightweight. It is equipped
with the following features:
SWITCH
The planer has a conveniently located trigger switch.
LOCK-OFF
The lock-off button locks the trigger switch in the OFF
position when the trigger switch is released.
WARNING
Do not allow familiarity with your planer to make
you careless. Remember that being careless a
fraction of a second is sufficient time to inflict
severe injury.
DEPTH ADJUSTMENT
Adjust the planing depth from 0 to 2.0 mm in 0.4 mm
increments, and the last step meet to the maximum depth
2.5 mm.
EDGE/RABBET GUIDE
The edge guide included allows you to plane edges and
make rabbet cuts.
DUST BAG
The dust bag attaches to the planer and helps keep the
work area free of dust and debris.
ADJUSTMENTS
WARNING
The power planer should never be connected to
a power supply when you are assembling parts,
making adjustments, cleaning, performing
maintenance, or when the tool is not in use.
Disconnecting the tool prevents accidental
starting that could cause serious injury.
ATTACHING THE DUST BAG (Fig. 1)
Follow these steps to attach the dust bag (9).
■
Unplug the planer.
■
Slide the collar (8) of the dust bag onto the exhaust
port (4).
NOTE: To remove the dust bag, pull it straight out of the
exhaust port.
CAUTION
The dust bag fills quickly. Empty it often to
prevent damage to the product.
