S
afe operation of this tool stand requires that you read and
understand this operator's manual and any labels affixed to
the tool. Safety is a combination of common sense and
staying alert.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL.
Read the operator's manual
carefully. Learn the applications and limitations as well
as specific potential hazards related to this tool.
GUARD AGAINST ELECTRICAL SHOCK
by preventing
body contact with grounded surfaces. For example:pipes,
radiators, ranges, refriqerator enclosures.
KEEP GUARDS IN PLACE
and in working order. Never
operate the tool with any guard or cover removed. Make
sure all guards are operating properly before each use.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit
of checking to see keys and adjusting wrenches are
removed from tool before turning it on.
KEEP THE WORK AREA CLEAN.
Cluttered work areas
and work benches invite accidents.
AVOID DANGEROUS ENVIRONMENTS.
Do not use power
tools near gasoline or other flammable liquids, in damp
or wet locations or expose them to rain. Keep work area
well lighted.
KEEP CHILDREN AND VISITORS AWAY.
All visitors should
wear safety glasses and be kept a safe distance from
work area.
MAKE WORKSHOP CHILD PROOF
with padlocks, master
switches, or by removing starter keys.
DON'T FORCE THE TOOL.
It will do the job better and safer
at the rate for which it was designed.
USE THE RIGHT TOOL.
Do not force the tool or attachment
to do a job for which it was not designed.
USE THE PROPER EXTENSION CORD.
Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating . A wire gauge size (A.W.G.) of at
least 16 is recommended for an extension cord 8 metres
or less in length. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
INSPECT EXTENSION CORDS PERIODICALLY
and
replace if damaged.
WEAR PROPER APPAREL.
Do not wear loose clothing,
neckties, or jewelry that can get caught in the tool's
moving parts and cause personal injury, Nonslip footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
Everyday eyeglasses have only impact-
resistant lenses; they are
NOT
safety glasses.
PROTECT YOUR LUNGS.
Wear a face or dust mask
if the sanding operation is dusty.
PROTECT YOUR HEARING.
Wear hearing protection during
extended periods of operation.
DON'T ABUSE CORD.
Never carry tool by the cord or yank
it to disconnect from receptacle. Keep cord away from
heat, oil, and sharp edges.
DO NOT OVERREACH.
Keep proper footing and balance
at all times.
MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean
for best and safest performance.Follow instructions for
lubricating and changing accessories.
NEVER LEAVE TOOL RUNNING UNATTENDED.TURN POWER
OFF.
Disconnect all tools when not in use, before
servicing, or when changing attachments, wheels, etc.
AVOID ACCIDENTAL STARTING.
Be sure switch is off when
plugging in.
USE RECOMMENDED ACCESSORIES.
The use of improper
accessories may cause risk of injury.
DO NOT use incorrect size discs or belts
.
NEVER touch belts or discs or other moving parts.
NEVER STAND ON TOOL.
Serious injury could occur if
the tool is tipped or if the wheel is unintentionally contacted.
DIRECTION OF FEED.
Be aware of wheel rotation direction;
never sand without the workrest being properly set.
NEVER
sand more than one workpiece at a time.
CHECK DAMAGED PARTS.
Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its
operation. A guard or other part that is damaged must be
properly repaired or replaced by an authorised service
centre to avoid risk of personal injury.
KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND
GREASE.
Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean tool.
INSPECT TOOL CORDS AND EXTENSION CORDS
PERIODICALLY
and, if damaged, have repaired by a
qualified service technician. Stay constantly aware of cord
location and keep it well away from the rotating wheel.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
Normal
sparking of the motor or sparking from grinding metal
could ignite fumes.
RULES FOR SAFE OPERATION
WARNING:
Wheel coasts after turn off.
EMBS200 MANUAL 2 5/5/05 2:57 PM Page 3
Содержание EMBS200
Страница 1: ...EMBS200 N197 MINI BELT DISC SANDER OWNER S OPERATION MANUAL...
Страница 15: ...NOTES...