Page4
APPLICATIONS
Fig.4
3
(Use only for the purposes listed below.)
Drilling wood, materials and resin boards.
Drilling concrete (impact drilling only).
Drilling metal steel brass, aluminum sheets, stainless
steel & pipe.
Noise (sound pressure level) in the workplace can exceed
85 dB (A). In this case, sound insulation and hearing
protection measures must be taken by the operator.
This tool is started and stopped by squeezing and
releasing the trigger switch (1).
The speed can be adjusted by controlling the pressure
applied to the trigger switch (1).
For continuous operation, press the lock button (5) while
squeezing the trigger. Squeeze again to release the
lock.
1
5
Fig.1
Fig.2
4
To change the rotation direction, stop the tool and push
the forward/reverse lever (2).
When the forward lever is pushed in, the bit rotates
clockwise when viewed from the handle end of the tool.
When the reverse lever is pushed in, the bit rotates
counterclockwise.
Fig.3
2
Insert the bit into the chuck (3) as far as it will go.
Then tighten the chuck securely by rotating the chuck
head to the left hand side.
The bit can be removed by rotating the chuck to the
right hand side.
The drilling mode shift knob (9) for changing between the
drilling mode and impact drilling mode is positioned on the
top of the tool.
DRILLING MODE: Shift the knob to the “ ”symbol for
rotation without impact action.
IMPACT DRILLING MODE: Shift the knob to the “ ”
symbol for impact drilling.
CHANGING BETWEEN DRILLING AND IMPACT
DRILLING MODE (FIG. 5)
Fig.5
9
NOISE BUILD-UP
SWITCH (FIG. 1 & 2)
CHANGING THE ROTATION DIRECTION (FIG. 3)
MOUNTING AND REMOVING THE BIT (FIG. 4)
