- 9 -
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Machine does not start
1. Power cord not plugged in.
1. Plug in cord.
2. Power cord is damaged.
2. Have the cord replaced at your nearest
authorised Ryobi service agent.
3. Circuit breaker is tripped.
3. Reset circuit breaker.
4. Circuit fuse is blown
4. Replace circuit fuse.
5. Switch is damaged or burned out.
5. Have the switch replaced at your
nearest authorised Ryobi service agent.
and request a voltage check from
the power company.
Motor does not reach full speed or
1. Voltage from power source is low.
1. Request a voltage check from the
power.
power company.
2. Circuit is overloaded.
2. Test on a different circuit or without
anything else on circuit.
3. Motor burned out.
3. Have tool serviced and request
a voltage check from the power
company.
4. Fuses or circuit breakers are
4. Have an electrician replace with a
wrong size.
circuit breaker.
5. Extension cord is too long.
5. Use a shorter extension cord.
6. Switch is defective.
6. Have the switch replaced at your
nearest authorised Ryobi service agent.
Содержание ECO-2435
Страница 1: ...ECO 2435 CUT OFF SAW OWNER S OPERATION MANUAL...
Страница 3: ...Fig 9 Fig 8 Fig 10 Fig 7 Fig 6 35 34 36 38 37...
Страница 4: ...Fig 13 Fig 12 Fig 11 39 40 17...
