background image

MELBOURNE:

960 Stud Road, Rowville, Vic, 3178,
Phone: (03) 9764 8655

HOBART:

All Enquiries Phone: 1300 361 505

BRISBANE:

All Enquiries Phone: 1300 361 505

PERTH:

33-35 Sorbonne Crescent, Canning Vale, 
WA, 6155, Phone: (08) 9455 7775

ADELAIDE:

All Enquiries Phone: 1300 361 505

TOWNSVILLE:

All Enquiries Phone: 1300 361 505

Subject to the guarantee condition below, this Ryobi tool
(hereinafter called “the product”) is guaranteed by Ryobi
(hereinafter called “the Company”) to be free from
defects in material or workmanship for a period of 12
months from the date of original purchase covering
both parts and labour. Under the terms of this
guarantee, the repair or replacement of any part shall
be the opinion of the Company or its authorised agent.
Should service become necessary during the guarantee
period, the owner should contact the Authorised Ryobi
Retailer from whom the Product was purchased, or the
nearest Company Branch Office. In order to obtain
guarantee service, the owner must present the sales
docket and Guarantee Certificate to confirm date of
purchase. This product is sold by the dealer or agent as
principal and the dealer has no authority from the
Company to give any additional guarantee on the
Company’s behalf except as herein contained or herein
referred to.

Guarantee Conditions

This guarantee only applies provided that the Product
has been used in accordance with the manufacturer’s
recommendations under normal use and reasonable
care (in the opinion of the Company) and such guarantee
does not cover damage, malfunction or failure resulting

from misuse, neglect, abuse, or used for a purpose for
which it was not-designed or is not suited; and no
repairs, alterations or modifications have been
attempted by other than an Authorised Service Centre.
This guarantee will not apply if the tool is damaged by
accident or if repairs arise from normal wear and tear.

The Company accepts no additional liability pursuant to
this guarantee for the costs of travelling or
transportation of the Product or parts to and from the
service dealer or agent - which costs are not included in
this guarantee.

Certain legislation, including the Trade Practices Act,
1974 (as amended) and other state and territorial laws
give rights to the buyer and impose liability on the seller
in certain circumstances. Nothing herein shall have the
effect of excluding, restricting or modifying any
condition, guarantee, right or liability imposed, to the
extent only that such exclusion, restriction or
modification would render any term herein void.

THIS GUARANTEE FORM

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

For your record and to assist in establishing date of purchase (necessary for in-guarantee service) 

please keep your purchase docket and this form completed with the following particulars.

PURCHASED FROM  _______________________________________________________
ADDRESS OF DEALER _____________________________________________________
DATE _________________MODEL NO ___________SERIAL NO ___________________

Present This Form With Your Purchase Docket When Guarantee Service Is Required

RYOBI TECHNOLOGIES AUSTRALIA PTY. LIMITED

A.C.N. 002 277 509 Incorporated in N.S.W.

SYDNEY:

359-361 Horsley Road, Milperra, N.S.W.
2214, Phone: (02) 9772 2444

email: [email protected]

RYOBI TECHNOLOGIES NEW ZEALAND LIMITED

Auckland:

503 Mt Wellington Highway, 

Mt Wellington, NZ, Phone: (09) 573 0230

email: [email protected]

RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD.

GUARANTEE

Содержание CSS1000





















Отзывы: