11
English
Clamp the end of the air chuck down onto the presta
valve adaptor by pressing air chuck clamp down until
it locks into place.
After inflation, remove air chuck and tighten locking
nut.
ACCESSORIES STORAGE
See figure 10.
When not in use, adaptors and needles provided with the
inflator can be placed in the storage area located on the
right side of the tool.
HOSE STORAGE
See figures 10 - 11
When not in use, the hoses provided with the inflator can
be placed in the storage areas located on both sides of
the inflator.
MAINTENANCE
WARNING
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
WARNING
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOLS
Safety alert
Please read the instructions carefully
before starting the machine.
Risk of injury. Explosive material.
Recycle
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice.
